ABOUT THIS GUIDE
================

This is a guide to building a custom BusyBox/Linux-libre system with the GNU
toolchain.  It mostly follows Linux From Scratch version 7.0, except that it
uses more recent versions of some software packages, avoids applying patches
where possible, builds cross-compiling GCC and other toolchain components in a
"sysroot" configuration, and uses a BusyBox-based userspace rather than a
GNU-based one.  This guide assumes the use of a GNU/Linux host system with all
the necessary development software (GCC, GNU Binutils, Subversion, etc.) already
installed.

It is recommended that you read Linux From Scratch version 7.0 to understand the
full build process and the rationale behind various elements of the setup.


PROCEDURE
=========

Make a directory in which all work will be done.  Under this directory, make
directories 'src' and sys'.

Download all of the necessary source archives and branches.
  src$ wget http://www.busybox.net/downloads/busybox-1.19.3.tar.bz2
  src$ wget http://www.fsfla.org/svnwiki/selibre/linux-libre/download/releases/\
  > LATEST-3.1.N/linux-3.1.6-libre.tar.bz2
  src$ svn co svn://svn.eglibc.org/branches/eglibc-2_14 eglibc-2.14
  src$ wget http://ftp.gnu.org/gnu/gcc/gcc-4.6.2/gcc-4.6.2.tar.bz2
  src$ wget http://ftp.gnu.org/gnu/binutils/binutils-2.22.tar.bz2
  src$ wget http://ftp.gnu.org/gnu/make/make-3.82.tar.bz2
  src$ wget http://ftp.gnu.org/gnu/automake/automake-1.11.2.tar.bz2
  src$ wget http://ftp.gnu.org/gnu/autoconf/autoconf-2.68.tar.bz2
  src$ wget http://ftp.gnu.org/gnu/m4/m4-1.4.16.tar.bz2
  src$ wget ftp://ftp.gmplib.org/pub/gmp-5.0.2/gmp-5.0.2.tar.bz2
  src$ wget http://www.mpfr.org/mpfr-current/mpfr-3.1.0.tar.bz2
  src$ wget http://www.multiprecision.org/mpc/download/mpc-0.9.tar.gz
  src$ for file in *.tar.bz2; do tar -xjf ${file}; done
  src$ for file in *.tar.gz; do tar -xzf ${file}; done

Make and mount the filesystem.
  sys$ dd if=/dev/zero of=fs bs=1024 count=$((3*1024*1024))
  sys$ sudo mkfs -t ext4 fs
  sys$ mkdir fsmnt
  sys$ sudo mount -o loop fs fsmnt

Set up the toolchain environment.  Be sure to change '<BASE_DIR>' to the
absolute path to the base work directory you made earlier.  We're using GNU Bash
as the new user's default shell for convenience; this has no effect on the
target system.
  sys$ sudo mkdir -v fsmnt/tools fsmnt/tools/usr fsmnt/src
  sys$ sudo ln -sv "${PWD}/fsmnt/tools" /tools
  sys$ sudo cp -pR ../src/*/ fsmnt/src/
  sys$ sudo groupadd bbll
  sys$ sudo useradd -s /bin/bash -g bbll -m -k /dev/null bbll
  sys$ sudo passwd bbll
  sys$ sudo chown -R bbll:bbll fsmnt/tools fsmnt/src
  sys$ su - bbll
  $ cat > ~/.bash_profile <<EOF
  > exec env -i HOME="${HOME}" TERM="${TERM}" PS1='\u:\w$ ' /bin/bash
  > EOF
  $ cat > ~/.bashrc <<EOF
  > set +h
  > umask 022
  > BBLL=<BASE_DIR>/sys/fsmnt
  > LC_ALL=C
  > BBLL_TARGET=$(uname -m)-bbll-linux-gnu
  > PATH=/tools/bin:/tools/usr/bin:/bin:/usr/bin
  > export BBLL LC_ALL BBLL_TARGET PATH
  > EOF
  $ source ~/.bash_profile

Configure and build a cross-compiling GNU Binutils.
  $ cd "${BBLL}/src"
  $ mkdir binutils-build
  $ cd binutils-build
  $ ../binutils-2.22/configure --target=${BBLL_TARGET} --prefix=/tools/usr \
  > --disable-nls --disable-werror
  $ make -j 4
  $ case $(uname -m) in
  > x86_64)
  > mkdir -v /tools/lib
  > ln -sv lib /tools/usr/lib64
  > ;;
  > esac
  $ make install

Configure and build a cross-compiling GCC.
  $ cd ..
  $ mv gmp-5.0.2/ gcc-4.6.2/gmp
  $ mv mpfr-3.1.0/ gcc-4.6.2/mpfr
  $ mv mpc-0.9/ gcc-4.6.2/mpc
  $ mkdir gcc-build
  $ cd gcc-build 
  $ ../gcc-4.6.2/configure --target=${BBLL_TARGET} --prefix=/tools/usr \
  > --disable-nls --disable-shared --disable-multilib --disable-decimal-float \
  > --disable-threads --disable-libmudflap --disable-libssp --disable-libgomp \
  > --disable-libquadmath --enable-languages=c --without-ppl --without-cloog \
  > --with-mpfr-include=$(pwd)/../gcc-4.6.2/mpfr/src \
  > --with-mpfr-lib=$(pwd)/mpfr/src/.libs
  $ make -j 4
  $ make install
  $ ln -sv libgcc.a $(${BBLL_TARGET}-gcc -print-libgcc-file-name | sed 's/libgcc/&_eh/')

Install Linux's headers for use by EGLIBC.
  $ cd ../linux-3.1.6 
  $ make mrproper
  $ make headers_check
  $ make INSTALL_HDR_PATH=/tools/usr headers_install

Configure and build a cross-compiling EGLIBC.
  ...