ABOUT THIS GUIDE
================

This is a guide to building a custom BusyBox/Linux-libre system with the GNU
toolchain.  It mostly follows Cross Linux From Scratch Sysroot version
SVN-0.0.1-20090726-x86, except that it uses more recent versions of software
packages and uses a BusyBox-based userspace rather than a GNU-based one.  This
guide assumes the use of a GNU/Linux host system with all the necessary
development software (GCC, GNU Binutils, Subversion, etc.) already installed.

It is recommended that you read Cross Linux From Scratch Sysroot version
SVN-0.0.1-20090726-x86 to understand the full build process and the rationale
behind various elements of the setup.


LEGAL NOTICE
============

THIS GUIDE:

  Copyright (C) 2012 Patrick (P. J.) McDermott

  This guide may be reproduced, distributed, modified, and otherwise dealt in
  under the terms of the Expat/MIT License:
  http://www.jclark.com/xml/copying.txt

CERTAIN COMMAND LINES AND FILE CONTENTS:

  Cross-Compiled Linux From Scratch - Sysroot
  Version SVN-0.0.1-20090726-x86

  Copyright © 2005-2009, Jim Gifford, & Ryan Oliver

  This material may be distributed only subject to the terms and conditions set
  forth in the Open Publication License v1.0 or later (the latest version is
  presently available at http://www.opencontent.org/openpub/).

  The latest version of the original book may be downloaded from:
  http://trac.cross-lfs.org/wiki/download#CLFSSysroot1.xUnderDevelopment
  It may also be read online at:
  http://cross-lfs.org/view/clfs-sysroot/x86/

TRADEMARKS:

  Linux is a Registered Trademark of Linus Torvalds.


PROCEDURE
=========

Make a directory in which all work will be done.  Under this directory, make
directories 'src' and sys':
  $ mkdir src sys

Download all of the necessary source archives and branches.
  $ cd src
  $ wget http://www.busybox.net/downloads/busybox-1.19.3.tar.bz2
  $ wget http://www.fsfla.org/svnwiki/selibre/linux-libre/download/releases/\
  > LATEST-3.1.N/linux-3.1.6-libre.tar.bz2
  $ svn co svn://svn.eglibc.org/branches/eglibc-2_14 eglibc-2.14
  $ wget http://ftp.gnu.org/gnu/gcc/gcc-4.6.2/gcc-4.6.2.tar.bz2
  $ wget http://ftp.gnu.org/gnu/binutils/binutils-2.22.tar.bz2
  $ wget http://ftp.gnu.org/gnu/make/make-3.82.tar.bz2
  $ wget http://ftp.gnu.org/gnu/automake/automake-1.11.2.tar.bz2
  $ wget http://ftp.gnu.org/gnu/autoconf/autoconf-2.68.tar.bz2
  $ wget http://ftp.gnu.org/gnu/m4/m4-1.4.16.tar.bz2
  $ wget ftp://ftp.gmplib.org/pub/gmp-5.0.2/gmp-5.0.2.tar.bz2
  $ wget http://www.mpfr.org/mpfr-current/mpfr-3.1.0.tar.bz2
  $ wget http://www.multiprecision.org/mpc/download/mpc-0.9.tar.gz
  $ for file in *.tar.bz2; do tar -xjf ${file}; done
  $ for file in *.tar.gz; do tar -xzf ${file}; done
  $ cd ..

Make and mount the filesystem.  mkfs and mount must be run as the superuser, but
dd shouldn't need to be.
  $ cd sys
  $ dd if=/dev/zero of=fs bs=1024 count=$((3*1024*1024))
  # mkfs -t ext4 fs
  $ mkdir fsmnt
  # mount -o loop fs fsmnt

Set up a new user.
  # groupadd bbl
  # useradd -s /bin/bash -g bbl -d /home/bbl bbl
  # mkdir -pv /home/bbl
  # chown -v bbl:bbl /home/bbl
  # passwd bbl
  # chown -Rv bbl fsmnt

Set up the toolchain work environment.  Be sure to change '<BASE_DIR>' to the
absolute path to the base work directory you made earlier, and adjust the
configuration name in BBL_TARGET if you're building for a different
architecture.  We're using GNU Bash as the new user's default shell for
convenience; this has no effect on the target system.
  $ su - bbl
  $ cat > ~/.bash_profile <<EOF
  > exec env -i HOME="${HOME}" TERM="${TERM}" /bin/bash
  > EOF
  $ cat > ~/.bashrc <<EOF
  > set +h
  > umask 022
  > BBL=<BASE_DIR>/sys/fsmnt
  > LC_ALL=C
  > PATH=<BASE_DIR>/sys/fsmnt/cross-tools/bin:/bin:/usr/bin
  > export BBL LC_ALL PATH
  > PS1='$ '
  > unset CFLAGS
  > unset CXXFLAGS
  > export BBL_HOST=$(echo ${MACHTYPE} | \
  > sed "s/$(echo ${MACHTYPE} | cut -d - -f 2)/cross/")
  > export BBL_TARGET=x86_64-pc-linux-gnu
  > EOF
  $ source ~/.bash_profile

Make system directories.  These commands should give you a system that is
compliant with Filesystem Hierarchy Standard version 2.3.  Note that the range
syntax in many of these command lines is a non-standard feature of GNU Bash;
this may not work on other shells.
  $ mkdir -pv ${BBL}/{bin,boot,dev,etc/opt,home,lib,media,mnt,opt,proc}
  $ install -dv -m 0750 ${BBL}/root
  $ mkdir -pv ${BBL}/{sbin,srv,sys}
  $ install -dv -m 1777 ${BBL}{,/var}/tmp
  $ mkdir -pv ${BBL}/usr/{,local/}{bin,include,lib,sbin,share/{man,misc},src}
  $ mkdir -pv ${BBL}/usr/local/{etc,games}
  $ mkdir -pv ${BBL}/usr/{,local/}share/{doc,info,locale,terminfo,zoneinfo}
  $ mkdir -pv ${BBL}/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
  $ ln -sv share/man ${BBL}/usr/local/man
  $ mkdir -pv ${BBL}/var/{cache,lib/misc,local,lock,log,mail,opt,run,spool}

Write the passwd and group files.
  $ cat > ${BBL}/etc/passwd <<EOF
  > root::0:0:root:/root:/bin/bash
  > EOF
  $ cat > ${BBL}/etc/group <<EOF
  > root:x:0:
  > bin:x:1:
  > sys:x:2:
  > kmem:x:3:
  > tty:x:4:
  > tape:x:5:
  > daemon:x:6:
  > floppy:x:7:
  > disk:x:8:
  > lp:x:9:
  > dialout:x:10:
  > audio:x:11:
  > video:x:12:
  > utmp:x:13:
  > usb:x:14:
  > cdrom:x:15:
  > EOF

If CONFIG_FEATURE_UTMP and/or CONFIG_FEATURE_WTMP are enabled in BusyBox,
certain BusyBox applets (getty, login, init, etc.) will log user logins to
/var/run/utmp and/or /var/run/wtmp.  However, BusyBox's supporting library won't
create /var/run/wtmp if it doesn't exist.  So create these files now and set
proper modes for them.
  $ touch ${BBL}/var/run/{u,w}tmp
  $ chmod -v 664 ${BBL}/var/run/{u,w}tmp
/var/run/utmp is used to track logged-in users.  /var/run/wtmp is used to record
when users log into and out of the system.  NB: This is an odd location for
wtmp, but that's where an unpatched BusyBox will expect it.

Make and change to a directory for package source code.
  $ mkdir -v ${BBL}/src
  $ cd ${BBL}/src

Install Linux's headers for use by EGLIBC.
  $ cp -pR ${BBL}/../../src/linux-3.1.6 .
  $ cd linux-3.1.6
  $ make mrproper
  $ make headers_check
  $ make INSTALL_HDR_PATH=${BBL}/usr headers_install
  $ find ${BBL}/usr/include/ -name .install -o -name ..install.cmd | \
  > xargs rm -fv
  $ cd ..
  $ rm -Rf linux-3.1.6

Install GMP for use by the cross-compiling GCC build.
  $ cp -pR ${BBL}/../../src/gmp-5.0.2 .
  $ cd gmp-5.0.2
  $ CPPFLAGS=-fexceptions ./configure --prefix=${BBL}/cross-tools --enable-cxx
  $ make
  $ make install
  $ make check
  $ cd ..
  $ rm -Rf gmp-5.0.2

Install MPFR for use by the cross-compiling GCC build.
  $ cp -pR ${BBL}/../../src/mpfr-3.1.0 .
  $ cd mpfr-3.1.0
  $ LDFLAGS="-Wl,-rpath,${BBL}/cross-tools/lib" ./configure \
  > --prefix=${BBL}/cross-tools --enable-shared --with-gmp=${BBL}/cross-tools
  $ make
  $ make install
  $ cd ..
  $ rm -Rf mpfr-3.1.0

Install MPC for use by the cross-compiling GCC build.
  $ cp -pR ${BBL}/../../src/mpc-0.9 .
  $ cd mpc-0.9
  $ LDFLAGS="-Wl,-rpath,${BBL}/cross-tools/lib" ./configure \
  > --prefix=${BBL}/cross-tools --with-mpfr=${BBL}/cross-tools \
  > --with-gmp=${BBL}/cross-tools
  $ make
  $ make install
  $ cd ..
  $ rm -Rf mpc-0.9

Configure and build a cross-compiling GNU Binutils.
  $ cp -pR ${BBL}/../../src/binutils-2.22 .
  $ mkdir -v binutils-build
  $ cd binutils-build
  $ AR=ar AS=as ../binutils-2.22/configure --prefix=${BBL}/cross-tools \
  > --host=${BBL_HOST} --target=${BBL_TARGET} --with-sysroot=${BBL} \
  > --disable-nls --enable-shared --disable-multilib
  $ make configure-host
  $ make
  $ make install
  $ cp -v ../binutils-2.22/include/libiberty.h ${BBL}/usr/include
  $ cd ..
  $ rm -Rf binutils-2.22 binutils-build

Configure and build a cross-compiling GCC.
  $ cp -pR ${BBL}/../../src/gcc-4.6.2 .
  $ mkdir -v gcc-build
  $ cd gcc-build
  $ AR=ar LDFLAGS="-Wl,-rpath,${BBL}/cross-tools/lib" ../gcc-4.6.2/configure \
  > --prefix=${BBL}/cross-tools --build=${BBL_HOST} --host=${BBL_HOST} \
  > --target=${BBL_TARGET} --disable-multilib --with-sysroot=${BBL} \
  > --disable-nls --without-headers --with-newlib --disable-decimal-float \
  > --disable-libgomp --disable-libmudflap --disable-libssp \
  > --with-mpfr=${BBL}/cross-tools --with-gmp=${BBL}/cross-tools \
  > --with-mpc=${BBL}/cross-tools --without-ppl --without-cloog \
  > --disable-shared --disable-threads --enable-languages=c
  $ make all-gcc all-target-libgcc
  $ make install-gcc install-target-libgcc
  $ cd ..
  $ rm -Rf gcc-4.6.2

Configure and build a cross-compiling EGLIBC.  Change '<LINUX_VER>' to the lower
of either version 3.1.6 or the version of Linux running on your host system.
  $ cp -pR ${BBL}/../../src/eglibc-2.14 .
  $ cd eglibc-2.14/libc
  $ cp -v Makeconfig{,.orig}
  $ sed -e 's/-lgcc_eh//g' Makeconfig.orig > Makeconfig
  $ cd ../..
  $ mkdir -v eglibc-build
  $ cd eglibc-build
  $ cat > config.cache <<EOF
  > libc_cv_forced_unwind=yes
  > libc_cv_c_cleanup=yes
  > libc_cv_gnu89_inline=yes
  > libc_cv_ssp=no
  > EOF
  $ cat > configparams <<EOF
  > install_root=${BBL}
  > EOF
  $ BUILD_CC=gcc CC=${BBL_TARGET}-gcc AR=${BBL_TARGET}-ar \
  > RANLIB=${BBL_TARGET}-ranlib \
  > CFLAGS="-march=$(cut -d - -f 1 <<< ${BBL_TARGET} | sed 's/x86_64/x86-64/') \
  > -mtune=generic -g -O2" ../eglibc-2.14/libc/configure --prefix=/usr \
  > --libexecdir=/usr/lib/eglibc --host=${BBL_TARGET} --build=${BBL_HOST} \
  > --disable-profile --enable-add-ons --with-tls --enable-kernel=<LINUX_VER> \
  > --with-__thread --with-binutils=${BBL}/cross-tools/bin \
  > --with-headers=${BBL}/usr/include --cache-file=config.cache
  $ make
  $ make install_root=${BBL} install