From a5b663c20303a6c19fceef76203a56c0fa8de6c6 Mon Sep 17 00:00:00 2001 From: P. J. McDermott Date: Tue, 26 May 2015 01:58:37 -0400 Subject: installers/pc: Remove --- (limited to 'installers') diff --git a/installers/local.mk b/installers/local.mk index 0bccdce..b0ec2a7 100644 --- a/installers/local.mk +++ b/installers/local.mk @@ -1,2 +1 @@ -installers_sources = \ - installers/pc.sh +installers_sources = diff --git a/installers/pc.sh b/installers/pc.sh deleted file mode 100755 index d23292b..0000000 --- a/installers/pc.sh +++ /dev/null @@ -1,308 +0,0 @@ -#!@SH@ - -set -u - -# This should be maintained in order of compatibility, i.e. each arch can also -# run programs built for the arches before it. -ARCHES='i686 amd64' - -# Description CPU Plat -PLATS=' -Acer Aspire One AO751h i686 ao751h -Dell Dimension 2400 i686 dimension2400 -Lenovo ThinkPad X60/X60s/X60t i686 x60 -' - -main() -{ - local opt= - local mirror= - local install_arch= - local host_arch= - local host_plat= - local mountpoint= - local b4= - local b3= - local b2= - local b1= - - while getopts 'm:' opt; do - case ${opt} in - m) mirror="${OPTARG}";; - ?) - print_usage >&2 - exit 1 - ;; - esac - done - shift $(($OPTIND - 1)) - if [ ${#} -ne 0 ]; then - print_usage >&2 - exit 1 - fi - - install_arch="$(detect_arch)" - printf '\nSelect a platorm' - printf '\n================\n\n' - read host_arch host_plat <<-EOF - $(prompt_plat) - EOF - host_arch="${host_arch}-${install_arch#*-}" - check_arch_compat "${install_arch}" "${host_arch}" - - printf '\nSelect a block device' - printf '\n=====================\n\n' - dev="$(prompt_block_dev)" - - printf '\nMaking partition table and file system' - printf '\n======================================\n\n' - make_partition_and_fs "${dev}" - - printf '\nInstalling base system' - printf '\n======================\n\n' - - mountpoint="$(mount_fs "${dev}")" - - "${0%installers/pc}src/prokit" install \ - -a "${host_arch}" -p "${host_plat}" \ - ${mirror:+-m} ${mirror} 'dev/trunk' "${mountpoint}" - - printf '\nInstalling boot loader' - printf '\n======================\n\n' - - read b4 b3 b2 b1 <<-EOF - $(od -An -tx1 -v -j 440 -N 4 "/dev/${dev}") - EOF - # This ln command won't be needed once lilo 24.1-1 is uploaded. - ln "${mountpoint}/boot/vmlinuz" "${mountpoint}/boot/vmlinuz.old" - "${0%installers/pc}src/prokit" shell "${mountpoint}" \ - install-lilo "/dev/${dev}" "PARTUUID=${b1}${b2}${b3}${b4}-01" - - umount_fs "${mountpoint}" -} - -print_usage() -{ - printf 'Usage: %s [-m ]\n' "${0}" -} - -error() -{ - local status=${1} - local fmt="${2}" - shift 2 - - printf "Error: ${fmt}\n" "${@}" >&2 - - exit ${status} -} - -_select() -{ - # Field width of the prompt numbers. - select_width=$(expr ${#} : '.*') - - select_i= - - while :; do - case "${select_i}" in - '') - select_i=0 - for select_word in "${@}"; do - select_i=$(expr ${select_i} + 1) - printf "%${select_width}d) %s\\n" \ - ${select_i} "${select_word}" \ - >&2 - done - ;; - *[!0-9]*) - printf 'Please enter a number in range.\n' >&2 - ;; - *) - if [ ${select_i} -gt 0 ] && \ - [ ${select_i} -le ${#} ]; then - shift $(expr $select_i - 1) - select_result="${1}" - break - fi - printf 'Please enter a number in range.\n' >&2 - ;; - esac - - # Prompt and read input. - printf '%s' "${PS3-#? }" >&2 - read -r select_i || exit - done -} - -detect_arch() -{ - local uname_m= - local uname_s= - local arch= - - uname_m="$( (uname -m) 2>/dev/null)" || uname_m='?' - uname_s="$( (uname -s) 2>/dev/null)" || uname_s='?' - case "${uname_m}:${uname_s}" in - 'i686:Linux') arch='i686-linux-glibc';; - 'x86_64:Linux') arch='amd64-linux-glibc';; - '?:?') error 2 'Architecture unknown';; - *) error 2 'Architecture unsupported';; - esac - - printf '%s\n' "${arch}" -} - -prompt_plat() -{ - local desc= - local arch= - local plat= - - set -- - while IFS=' ' read -r desc arch plat; do - [ "x${desc}" = 'x' ] && continue - set -- "${@}" "${desc}" - done <<-EOF - ${PLATS} - EOF - - printf 'Select a platform:\n' >&2 - _select "${@}" - - while IFS=' ' read -r desc arch plat; do - if [ "x${desc}" = "x${select_result}" ]; then - printf '%s %s\n' "${arch}" "${plat}" - break - fi - done <<-EOF - ${PLATS} - EOF -} - -check_arch_compat() -{ - local install_arch="${1}" - local host_arch="${2}" - local arches= - local install_cpu= - local host_cpu= - - if [ "x${install_arch}" = "x${host_arch}" ]; then - return 0 - fi - - arches="$(printf ' %s ' ${ARCHES})" - install_cpu="${install_arch%%-*}" - host_cpu="${host_arch%%-*}" - if [ "x${arches#* ${host_cpu} * ${install_cpu} }" = "x${arches}" ] - then - error 2 'Cannot install a system of architecture %s on %s %s' \ - "${host_arch}" 'a system of architecture' \ - "${install_arch}" - fi -} - -pretty_print_size_dec() -{ - local size="${1}" - - awk -v size=${size} 'BEGIN { - split("B KB MB GB TB", units, " "); - i=1; - while (size >= 1000) { - size /= 1000; - ++i; - }; - printf("%.2f %s\n", size, units[i]); }' -} - -pretty_print_size_bin() -{ - local size="${1}" - - awk -v size=${size} 'BEGIN { - split("B KiB MiB GiB TiB", units, " "); - i=1; - while (size >= 1024) { - size /= 1024; - ++i; - }; - printf("%.2f %s\n", size, units[i]); }' -} - -prompt_block_dev() -{ - local dev= - local vendor= - local model= - local name= - local size= - local size_s= - local desc= - local devs= - - set -- - for dev in /sys/block/*; do - dev="${dev#/sys/block/}" - case "${dev}" in - loop*|sr*) continue;; - esac - if [ -e "/sys/block/${dev}/device/vendor" ]; then - vendor="$(cat "/sys/block/${dev}/device/vendor")" - model="$(cat "/sys/block/${dev}/device/model")" - name="${vendor} ${model}" - else - name="$(cat "/sys/block/${dev}/device/name")" - fi - size="$(cat "/sys/block/${dev}/size")" - size="$(expr ${size} \* 512)" - size_s="$(pretty_print_size_dec "${size}")" - size_s="${size_s} ($(pretty_print_size_bin "${size}"))" - desc="$(printf '%s (%s) - %s\n' "${name}" "${dev}" "${size_s}")" - set -- "${@}" "${desc}" - devs="$(printf '%s\n%s\t%s\n' "${devs}" "${desc}" "${dev}")" - done - - printf 'Select a block device:\n' >&2 - _select "${@}" - - while IFS=' ' read -r desc dev; do - if [ "x${desc}" = "x${select_result}" ]; then - printf '%s\n' "${dev}" - fi - done <<-EOF - ${devs} - EOF -} - -make_partition_and_fs() -{ - local dev="${1}" - - dd if=/dev/zero of="/dev/${dev}" bs=512 count=1 - printf 'n\np\n1\n\n\nt\n83\na\n1\nw\n' | fdisk "/dev/${dev}" - mke2fs -t ext4 "/dev/${dev}1" -} - -mount_fs() -{ - local dev="${1}" - local mountpoint= - - mountpoint="$(mktemp -d)" - mount "/dev/${dev}1" "${mountpoint}" - printf '%s\n' "${mountpoint}" -} - -umount_fs() -{ - local mountpoint="${1}" - - while ! umount "${mountpoint}"; do - sleep 1 - done - rmdir "${mountpoint}" -} - -main "${@}" -- cgit v0.9.1