summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--doc/install/pc.mdwn295
1 files changed, 52 insertions, 243 deletions
diff --git a/doc/install/pc.mdwn b/doc/install/pc.mdwn
index 64ce573..8e749b4 100644
--- a/doc/install/pc.mdwn
+++ b/doc/install/pc.mdwn
@@ -45,7 +45,7 @@ Sample Installation
Following is an installation of ProteanOS for the Dell Dimension 2400 to a hard
disk drive connected to a laptop by a SATA to USB adapter:
- $ sudo installers/pc.sh
+ $ sudo installers/pc
Select a platorm
================
@@ -53,25 +53,25 @@ disk drive connected to a laptop by a SATA to USB adapter:
Select a platform:
1) Acer Aspire One AO751h
2) Dell Dimension 2400
+ 3) Lenovo ThinkPad X60/X60s/X60t
#? 2
Select a block device
=====================
Select a block device:
- 1) SD32G (mmcblk0) - 31.49 GB (29.32 GiB)
- 2) ATA WDC WD3200BEKT-6 (sda) - 320.07 GB (298.09 GiB)
- 3) ST316021 5ACE (sdd) - 160.04 GB (149.05 GiB)
- #? 3
+ 1) ATA WDC WD3200BEKT-6 (sda) - 320.07 GB (298.09 GiB)
+ 2) ST316021 5ACE (sdb) - 160.04 GB (149.05 GiB)
+ #? 2
Making partition table and file system
======================================
1+0 records in
1+0 records out
- 512 bytes (512 B) copied, 0.00984386 s, 52.0 kB/s
+ 512 bytes (512 B) copied, 0.00334818 s, 153 kB/s
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
- Building a new DOS disklabel with disk identifier 0x8a39a80e.
+ Building a new DOS disklabel with disk identifier 0x51011a81.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
@@ -116,38 +116,46 @@ disk drive connected to a laptop by a SATA to USB adapter:
Installing base system
======================
- Using architecture i686-linux-glibc
- Using platform dimension2400
- Using mirror http://mirror.gnu.dk/pub/proteanos
- Setting up root...
- Configuring opkg and retrieving Packages...
- Downloading proteanos-branding...
- Unpacking proteanos-branding...
- Downloading libc-bin...
- Unpacking libc-bin...
- Downloading libc.6...
- Unpacking libc.6...
- Downloading libopkg.1...
- Unpacking libopkg.1...
- Downloading opkg...
- Unpacking opkg...
- Downloading base-files...
- Unpacking base-files...
- Downloading busybox...
- Unpacking busybox...
- Downloading linux-image...
- Unpacking linux-image...
- Configuring packages...
- Package base-files (1.0.2) installed in root is up to date.
- Package busybox (1.21.1-8) installed in root is up to date.
- Package libc-bin (2.19~r25243+sip1-3) installed in root is up to date.
+ prokit: Using architecture i686-linux-glibc
+ prokit: Using platform dimension2400
+ prokit: Using mirror http://us.mirror.gnu.dk/pub/proteanos
+ prokit: Setting up root...
+ prokit: Configuring opkg and retrieving Packages files...
+ prokit: Downloading base-files...
+ prokit: Unpacking base-files...
+ prokit: Downloading busybox...
+ prokit: Unpacking busybox...
+ prokit: Downloading config-base...
+ prokit: Unpacking config-base...
+ prokit: Downloading config-dimension2400-common...
+ prokit: Unpacking config-dimension2400-common...
+ prokit: Downloading libc.6...
+ prokit: Unpacking libc.6...
+ prokit: Downloading libopkg.1...
+ prokit: Unpacking libopkg.1...
+ prokit: Downloading linux-common...
+ prokit: Unpacking linux-common...
+ prokit: Downloading linux-image...
+ prokit: Unpacking linux-image...
+ prokit: Downloading opkg...
+ prokit: Unpacking opkg...
+ prokit: Downloading proteanos-branding...
+ prokit: Unpacking proteanos-branding...
+ prokit: Configuring packages...
+ Package base-files (1.0.3) installed in root is up to date.
+ Package busybox (1.21.1-12) installed in root is up to date.
+ Package config-base (1.5) installed in root is up to date.
+ Package config-dimension2400-common (1.5) installed in root is up to date.
Package libc.6 (2.19~r25243+sip1-3) installed in root is up to date.
Package libopkg.1 (0.2.2-1) installed in root is up to date.
- Package linux-image (3.10.48~gnu-1) installed in root is up to date.
+ Package linux-common (3.10.55~gnu-1) installed in root is up to date.
+ Package linux-image (3.10.55~gnu-1) installed in root is up to date.
Package opkg (0.2.2-1) installed in root is up to date.
- Package proteanos-branding (0.1) installed in root is up to date.
+ Package proteanos-branding (0.2) installed in root is up to date.
+ Configuring linux-common.
Configuring libopkg.1.
Configuring opkg.
+ Configuring libc.6.
Configuring busybox.
update-alternatives: Linking //usr/bin/awk to /usr/bin/awk.busybox
update-alternatives: Linking //usr/bin/dc to /usr/bin/dc.busybox
@@ -165,215 +173,20 @@ disk drive connected to a laptop by a SATA to USB adapter:
update-alternatives: Linking //usr/bin/clear to /usr/bin/clear.busybox
update-alternatives: Linking //usr/bin/reset to /usr/bin/reset.busybox
update-alternatives: Linking //usr/bin/mkpasswd to /usr/bin/mkpasswd.busybox
+ update-alternatives: Linking //usr/bin/patch to /usr/bin/patch.busybox
Configuring base-files.
- Configuring libc.6.
- Configuring linux-image.
+ Configuring config-dimension2400-common.
Configuring proteanos-branding.
- Configuring libc-bin.
-
- Configure the network
- =====================
-
- Network configuration method:
- 1) Static
- 2) DHCP
- #? 2
-
- Set up users and passwords
- ==========================
-
- Changing password for root
- New password:
- Bad password: too short
- Retype password:
- Password for root changed by root
-
- Installing tzcode (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/i686-linux-glibc/all/base/../../../../../../pool/t/tzcode/tzcode_2014c-1_i686-linux-glibc_all.opk.
- Installing tzdata (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata_2014c-1_all_all.opk.
- Package tzdata (2014c-1) installed in root is up to date.
- Installing tzdata-factory (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-factory_2014c-1_all_all.opk.
- Installing tzdata-northamerica (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-northamerica_2014c-1_all_all.opk.
- Installing tzdata-africa (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-africa_2014c-1_all_all.opk.
- Installing tzdata-etcetera (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-etcetera_2014c-1_all_all.opk.
- Installing tzdata-australasia (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-australasia_2014c-1_all_all.opk.
- Installing tzdata-europe (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-europe_2014c-1_all_all.opk.
- Installing tzdata-southamerica (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-southamerica_2014c-1_all_all.opk.
- Installing tzdata-antarctica (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-antarctica_2014c-1_all_all.opk.
- Installing tzdata-asia (2014c-1) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-asia_2014c-1_all_all.opk.
- Configuring tzdata.
- Configuring tzdata-factory.
- Configuring tzdata-northamerica.
- Configuring tzdata-africa.
- Configuring tzcode.
- Configuring tzdata-etcetera.
- Configuring tzdata-australasia.
- Configuring tzdata-europe.
- Configuring tzdata-southamerica.
- Configuring tzdata-antarctica.
- Configuring tzdata-asia.
-
- Configure the time zone
- =======================
-
- Please identify a location so that time zone rules can be set correctly.
- Please select a continent, ocean, "coord", or "TZ".
- 1) Africa
- 2) Americas
- 3) Antarctica
- 4) Arctic Ocean
- 5) Asia
- 6) Atlantic Ocean
- 7) Australia
- 8) Europe
- 9) Indian Ocean
- 10) Pacific Ocean
- 11) coord - I want to use geographical coordinates.
- 12) TZ - I want to specify the time zone using the Posix TZ format.
- #? 2
- Please select a country whose clocks agree with yours.
- 1) Anguilla
- 2) Antigua & Barbuda
- 3) Argentina
- 4) Aruba
- 5) Bahamas
- 6) Barbados
- 7) Belize
- 8) Bolivia
- 9) Brazil
- 10) Canada
- 11) Caribbean Netherlands
- 12) Cayman Islands
- 13) Chile
- 14) Colombia
- 15) Costa Rica
- 16) Cuba
- 17) Curacao
- 18) Dominica
- 19) Dominican Republic
- 20) Ecuador
- 21) El Salvador
- 22) French Guiana
- 23) Greenland
- 24) Grenada
- 25) Guadeloupe
- 26) Guatemala
- 27) Guyana
- 28) Haiti
- 29) Honduras
- 30) Jamaica
- 31) Martinique
- 32) Mexico
- 33) Montserrat
- 34) Nicaragua
- 35) Panama
- 36) Paraguay
- 37) Peru
- 38) Puerto Rico
- 39) St Barthelemy
- 40) St Kitts & Nevis
- 41) St Lucia
- 42) St Maarten (Dutch part)
- 43) St Martin (French part)
- 44) St Pierre & Miquelon
- 45) St Vincent
- 46) Suriname
- 47) Trinidad & Tobago
- 48) Turks & Caicos Is
- 49) United States
- 50) Uruguay
- 51) Venezuela
- 52) Virgin Islands (UK)
- 53) Virgin Islands (US)
- #? 49
- Please select one of the following time zone regions.
- 1) Eastern Time
- 2) Eastern Time - Michigan - most locations
- 3) Eastern Time - Kentucky - Louisville area
- 4) Eastern Time - Kentucky - Wayne County
- 5) Eastern Time - Indiana - most locations
- 6) Eastern Time - Indiana - Daviess, Dubois, Knox & Martin Counties
- 7) Eastern Time - Indiana - Pulaski County
- 8) Eastern Time - Indiana - Crawford County
- 9) Eastern Time - Indiana - Pike County
- 10) Eastern Time - Indiana - Switzerland County
- 11) Central Time
- 12) Central Time - Indiana - Perry County
- 13) Central Time - Indiana - Starke County
- 14) Central Time - Michigan - Dickinson, Gogebic, Iron & Menominee Counties
- 15) Central Time - North Dakota - Oliver County
- 16) Central Time - North Dakota - Morton County (except Mandan area)
- 17) Central Time - North Dakota - Mercer County
- 18) Mountain Time
- 19) Mountain Time - south Idaho & east Oregon
- 20) Mountain Standard Time - Arizona (except Navajo)
- 21) Pacific Time
- 22) Alaska Time
- 23) Alaska Time - Alaska panhandle
- 24) Alaska Time - southeast Alaska panhandle
- 25) Alaska Time - Alaska panhandle neck
- 26) Alaska Time - west Alaska
- 27) Aleutian Islands
- 28) Metlakatla Time - Annette Island
- 29) Hawaii
- #? 1
-
- The following information has been given:
-
- United States
- Eastern Time
-
- Therefore TZ='America/New_York' will be used.
- Local time is now: Wed Jul 23 12:42:06 EDT 2014.
- Universal Time is now: Wed Jul 23 16:42:06 UTC 2014.
- Is the above information OK?
- 1) Yes
- 2) No
- #? 1
-
- You can make this change permanent for yourself by appending the line
- TZ='America/New_York'; export TZ
- to the file '.profile' in your home directory; then log out and log in again.
-
- Here is that TZ value again, this time on standard output so that you
- can use the /usr/sbin/tzselect command in shell scripts:
-
- Removing package tzcode from root...
- Removing package tzdata-factory from root...
- Removing package tzdata-africa from root...
- Removing package tzdata-etcetera from root...
- Removing package tzdata-australasia from root...
- Removing package tzdata-europe from root...
- Removing package tzdata-southamerica from root...
- Removing package tzdata-antarctica from root...
- Removing package tzdata-asia from root...
+ Configuring config-base.
+ Configuring linux-image.
Installing lilo (24.0-2) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/i686-linux-glibc/all/base/../../../../../../pool/l/lilo/lilo_24.0-2_i686-linux-glibc_all.opk.
- Installing config-lilo (1.2) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/dimension2400/base/../../../../../../pool/c/config-dimension2400/config-lilo_1.2_all_dimension2400.opk.
- Installing config-dimension2400-common (1.2) on root.
- Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/c/config-dimension2400/config-dimension2400-common_1.2_all_all.opk.
- Configuring config-dimension2400-common.
+ Downloading http://us.mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/i686-linux-glibc/all/base/../../../../../../pool/l/lilo/lilo_24.0-2_i686-linux-glibc_all.opk.
+ Installing config-lilo (1.5) on root.
+ Downloading http://us.mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/dimension2400/base/../../../../../../pool/c/config-dimension2400/config-lilo_1.5_all_dimension2400.opk.
Configuring config-lilo.
Configuring lilo.
-
- Install the boot loader
- =======================
-
- Name of root partition on running system (e.g. "sda1"): sda1
-
- Reading boot sector from /dev/sdd
- Warning: /dev/sdd is not on the first disk
+ Reading boot sector from /dev/sdb
+ Warning: /dev/sdb is not on the first disk
Warning: Unable to determine video adapter in use in the present system.
Using BITMAP secondary loader
Calling map_insert_data
@@ -392,9 +205,5 @@ disk drive connected to a laptop by a SATA to USB adapter:
Added ProteanOS_1.0_+
Writing boot sector.
- Backup copy of boot sector in /boot/boot.0830
+ Backup copy of boot sector in /boot/boot.0810
3 warnings were issued.
-
- Installation complete!
-
- Exiting...