From c0cd4f23ee7e69d24f1396eadef5cc0e0cfa6b73 Mon Sep 17 00:00:00 2001 From: P. J. McDermott Date: Thu, 13 Nov 2014 19:07:41 -0500 Subject: doc/install/pc: Give prokit sample output --- (limited to 'doc') diff --git a/doc/install/pc.mdwn b/doc/install/pc.mdwn index 64ce573..8e749b4 100644 --- a/doc/install/pc.mdwn +++ b/doc/install/pc.mdwn @@ -45,7 +45,7 @@ Sample Installation Following is an installation of ProteanOS for the Dell Dimension 2400 to a hard disk drive connected to a laptop by a SATA to USB adapter: - $ sudo installers/pc.sh + $ sudo installers/pc Select a platorm ================ @@ -53,25 +53,25 @@ disk drive connected to a laptop by a SATA to USB adapter: Select a platform: 1) Acer Aspire One AO751h 2) Dell Dimension 2400 + 3) Lenovo ThinkPad X60/X60s/X60t #? 2 Select a block device ===================== Select a block device: - 1) SD32G (mmcblk0) - 31.49 GB (29.32 GiB) - 2) ATA WDC WD3200BEKT-6 (sda) - 320.07 GB (298.09 GiB) - 3) ST316021 5ACE (sdd) - 160.04 GB (149.05 GiB) - #? 3 + 1) ATA WDC WD3200BEKT-6 (sda) - 320.07 GB (298.09 GiB) + 2) ST316021 5ACE (sdb) - 160.04 GB (149.05 GiB) + #? 2 Making partition table and file system ====================================== 1+0 records in 1+0 records out - 512 bytes (512 B) copied, 0.00984386 s, 52.0 kB/s + 512 bytes (512 B) copied, 0.00334818 s, 153 kB/s Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel - Building a new DOS disklabel with disk identifier 0x8a39a80e. + Building a new DOS disklabel with disk identifier 0x51011a81. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. @@ -116,38 +116,46 @@ disk drive connected to a laptop by a SATA to USB adapter: Installing base system ====================== - Using architecture i686-linux-glibc - Using platform dimension2400 - Using mirror http://mirror.gnu.dk/pub/proteanos - Setting up root... - Configuring opkg and retrieving Packages... - Downloading proteanos-branding... - Unpacking proteanos-branding... - Downloading libc-bin... - Unpacking libc-bin... - Downloading libc.6... - Unpacking libc.6... - Downloading libopkg.1... - Unpacking libopkg.1... - Downloading opkg... - Unpacking opkg... - Downloading base-files... - Unpacking base-files... - Downloading busybox... - Unpacking busybox... - Downloading linux-image... - Unpacking linux-image... - Configuring packages... - Package base-files (1.0.2) installed in root is up to date. - Package busybox (1.21.1-8) installed in root is up to date. - Package libc-bin (2.19~r25243+sip1-3) installed in root is up to date. + prokit: Using architecture i686-linux-glibc + prokit: Using platform dimension2400 + prokit: Using mirror http://us.mirror.gnu.dk/pub/proteanos + prokit: Setting up root... + prokit: Configuring opkg and retrieving Packages files... + prokit: Downloading base-files... + prokit: Unpacking base-files... + prokit: Downloading busybox... + prokit: Unpacking busybox... + prokit: Downloading config-base... + prokit: Unpacking config-base... + prokit: Downloading config-dimension2400-common... + prokit: Unpacking config-dimension2400-common... + prokit: Downloading libc.6... + prokit: Unpacking libc.6... + prokit: Downloading libopkg.1... + prokit: Unpacking libopkg.1... + prokit: Downloading linux-common... + prokit: Unpacking linux-common... + prokit: Downloading linux-image... + prokit: Unpacking linux-image... + prokit: Downloading opkg... + prokit: Unpacking opkg... + prokit: Downloading proteanos-branding... + prokit: Unpacking proteanos-branding... + prokit: Configuring packages... + Package base-files (1.0.3) installed in root is up to date. + Package busybox (1.21.1-12) installed in root is up to date. + Package config-base (1.5) installed in root is up to date. + Package config-dimension2400-common (1.5) installed in root is up to date. Package libc.6 (2.19~r25243+sip1-3) installed in root is up to date. Package libopkg.1 (0.2.2-1) installed in root is up to date. - Package linux-image (3.10.48~gnu-1) installed in root is up to date. + Package linux-common (3.10.55~gnu-1) installed in root is up to date. + Package linux-image (3.10.55~gnu-1) installed in root is up to date. Package opkg (0.2.2-1) installed in root is up to date. - Package proteanos-branding (0.1) installed in root is up to date. + Package proteanos-branding (0.2) installed in root is up to date. + Configuring linux-common. Configuring libopkg.1. Configuring opkg. + Configuring libc.6. Configuring busybox. update-alternatives: Linking //usr/bin/awk to /usr/bin/awk.busybox update-alternatives: Linking //usr/bin/dc to /usr/bin/dc.busybox @@ -165,215 +173,20 @@ disk drive connected to a laptop by a SATA to USB adapter: update-alternatives: Linking //usr/bin/clear to /usr/bin/clear.busybox update-alternatives: Linking //usr/bin/reset to /usr/bin/reset.busybox update-alternatives: Linking //usr/bin/mkpasswd to /usr/bin/mkpasswd.busybox + update-alternatives: Linking //usr/bin/patch to /usr/bin/patch.busybox Configuring base-files. - Configuring libc.6. - Configuring linux-image. + Configuring config-dimension2400-common. Configuring proteanos-branding. - Configuring libc-bin. - - Configure the network - ===================== - - Network configuration method: - 1) Static - 2) DHCP - #? 2 - - Set up users and passwords - ========================== - - Changing password for root - New password: - Bad password: too short - Retype password: - Password for root changed by root - - Installing tzcode (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/i686-linux-glibc/all/base/../../../../../../pool/t/tzcode/tzcode_2014c-1_i686-linux-glibc_all.opk. - Installing tzdata (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata_2014c-1_all_all.opk. - Package tzdata (2014c-1) installed in root is up to date. - Installing tzdata-factory (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-factory_2014c-1_all_all.opk. - Installing tzdata-northamerica (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-northamerica_2014c-1_all_all.opk. - Installing tzdata-africa (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-africa_2014c-1_all_all.opk. - Installing tzdata-etcetera (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-etcetera_2014c-1_all_all.opk. - Installing tzdata-australasia (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-australasia_2014c-1_all_all.opk. - Installing tzdata-europe (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-europe_2014c-1_all_all.opk. - Installing tzdata-southamerica (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-southamerica_2014c-1_all_all.opk. - Installing tzdata-antarctica (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-antarctica_2014c-1_all_all.opk. - Installing tzdata-asia (2014c-1) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/t/tzdata/tzdata-asia_2014c-1_all_all.opk. - Configuring tzdata. - Configuring tzdata-factory. - Configuring tzdata-northamerica. - Configuring tzdata-africa. - Configuring tzcode. - Configuring tzdata-etcetera. - Configuring tzdata-australasia. - Configuring tzdata-europe. - Configuring tzdata-southamerica. - Configuring tzdata-antarctica. - Configuring tzdata-asia. - - Configure the time zone - ======================= - - Please identify a location so that time zone rules can be set correctly. - Please select a continent, ocean, "coord", or "TZ". - 1) Africa - 2) Americas - 3) Antarctica - 4) Arctic Ocean - 5) Asia - 6) Atlantic Ocean - 7) Australia - 8) Europe - 9) Indian Ocean - 10) Pacific Ocean - 11) coord - I want to use geographical coordinates. - 12) TZ - I want to specify the time zone using the Posix TZ format. - #? 2 - Please select a country whose clocks agree with yours. - 1) Anguilla - 2) Antigua & Barbuda - 3) Argentina - 4) Aruba - 5) Bahamas - 6) Barbados - 7) Belize - 8) Bolivia - 9) Brazil - 10) Canada - 11) Caribbean Netherlands - 12) Cayman Islands - 13) Chile - 14) Colombia - 15) Costa Rica - 16) Cuba - 17) Curacao - 18) Dominica - 19) Dominican Republic - 20) Ecuador - 21) El Salvador - 22) French Guiana - 23) Greenland - 24) Grenada - 25) Guadeloupe - 26) Guatemala - 27) Guyana - 28) Haiti - 29) Honduras - 30) Jamaica - 31) Martinique - 32) Mexico - 33) Montserrat - 34) Nicaragua - 35) Panama - 36) Paraguay - 37) Peru - 38) Puerto Rico - 39) St Barthelemy - 40) St Kitts & Nevis - 41) St Lucia - 42) St Maarten (Dutch part) - 43) St Martin (French part) - 44) St Pierre & Miquelon - 45) St Vincent - 46) Suriname - 47) Trinidad & Tobago - 48) Turks & Caicos Is - 49) United States - 50) Uruguay - 51) Venezuela - 52) Virgin Islands (UK) - 53) Virgin Islands (US) - #? 49 - Please select one of the following time zone regions. - 1) Eastern Time - 2) Eastern Time - Michigan - most locations - 3) Eastern Time - Kentucky - Louisville area - 4) Eastern Time - Kentucky - Wayne County - 5) Eastern Time - Indiana - most locations - 6) Eastern Time - Indiana - Daviess, Dubois, Knox & Martin Counties - 7) Eastern Time - Indiana - Pulaski County - 8) Eastern Time - Indiana - Crawford County - 9) Eastern Time - Indiana - Pike County - 10) Eastern Time - Indiana - Switzerland County - 11) Central Time - 12) Central Time - Indiana - Perry County - 13) Central Time - Indiana - Starke County - 14) Central Time - Michigan - Dickinson, Gogebic, Iron & Menominee Counties - 15) Central Time - North Dakota - Oliver County - 16) Central Time - North Dakota - Morton County (except Mandan area) - 17) Central Time - North Dakota - Mercer County - 18) Mountain Time - 19) Mountain Time - south Idaho & east Oregon - 20) Mountain Standard Time - Arizona (except Navajo) - 21) Pacific Time - 22) Alaska Time - 23) Alaska Time - Alaska panhandle - 24) Alaska Time - southeast Alaska panhandle - 25) Alaska Time - Alaska panhandle neck - 26) Alaska Time - west Alaska - 27) Aleutian Islands - 28) Metlakatla Time - Annette Island - 29) Hawaii - #? 1 - - The following information has been given: - - United States - Eastern Time - - Therefore TZ='America/New_York' will be used. - Local time is now: Wed Jul 23 12:42:06 EDT 2014. - Universal Time is now: Wed Jul 23 16:42:06 UTC 2014. - Is the above information OK? - 1) Yes - 2) No - #? 1 - - You can make this change permanent for yourself by appending the line - TZ='America/New_York'; export TZ - to the file '.profile' in your home directory; then log out and log in again. - - Here is that TZ value again, this time on standard output so that you - can use the /usr/sbin/tzselect command in shell scripts: - - Removing package tzcode from root... - Removing package tzdata-factory from root... - Removing package tzdata-africa from root... - Removing package tzdata-etcetera from root... - Removing package tzdata-australasia from root... - Removing package tzdata-europe from root... - Removing package tzdata-southamerica from root... - Removing package tzdata-antarctica from root... - Removing package tzdata-asia from root... + Configuring config-base. + Configuring linux-image. Installing lilo (24.0-2) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/i686-linux-glibc/all/base/../../../../../../pool/l/lilo/lilo_24.0-2_i686-linux-glibc_all.opk. - Installing config-lilo (1.2) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/dimension2400/base/../../../../../../pool/c/config-dimension2400/config-lilo_1.2_all_dimension2400.opk. - Installing config-dimension2400-common (1.2) on root. - Downloading http://mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/all/base/../../../../../../pool/c/config-dimension2400/config-dimension2400-common_1.2_all_all.opk. - Configuring config-dimension2400-common. + Downloading http://us.mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/i686-linux-glibc/all/base/../../../../../../pool/l/lilo/lilo_24.0-2_i686-linux-glibc_all.opk. + Installing config-lilo (1.5) on root. + Downloading http://us.mirror.gnu.dk/pub/proteanos/feeds/dev/trunk/all/dimension2400/base/../../../../../../pool/c/config-dimension2400/config-lilo_1.5_all_dimension2400.opk. Configuring config-lilo. Configuring lilo. - - Install the boot loader - ======================= - - Name of root partition on running system (e.g. "sda1"): sda1 - - Reading boot sector from /dev/sdd - Warning: /dev/sdd is not on the first disk + Reading boot sector from /dev/sdb + Warning: /dev/sdb is not on the first disk Warning: Unable to determine video adapter in use in the present system. Using BITMAP secondary loader Calling map_insert_data @@ -392,9 +205,5 @@ disk drive connected to a laptop by a SATA to USB adapter: Added ProteanOS_1.0_+ Writing boot sector. - Backup copy of boot sector in /boot/boot.0830 + Backup copy of boot sector in /boot/boot.0810 3 warnings were issued. - - Installation complete! - - Exiting... -- cgit v0.9.1