installers/pc: Remove

2 files changed, 1 insertions, 310 deletions

diff --git a/installers/local.mk b/installers/local.mk
index 0bccdce..b0ec2a7 100644
--- a/installers/local.mk
+++ b/installers/local.mk
@@ -1,2 +1 @@
-installers_sources = \
-	installers/pc.sh
+installers_sources =
diff --git a/installers/pc.sh b/installers/pc.sh
deleted file mode 100755
index d23292b..0000000
--- a/installers/pc.sh
+++ /dev/null
@@ -1,308 +0,0 @@
-#!@SH@
-
-set -u
-
-# This should be maintained in order of compatibility, i.e. each arch can also
-# run programs built for the arches before it.
-ARCHES='i686 amd64'
-
-# Description		CPU	Plat
-PLATS='
-Acer Aspire One AO751h	i686	ao751h
-Dell Dimension 2400	i686	dimension2400
-Lenovo ThinkPad X60/X60s/X60t	i686	x60
-'
-
-main()
-{
-	local opt=
-	local mirror=
-	local install_arch=
-	local host_arch=
-	local host_plat=
-	local mountpoint=
-	local b4=
-	local b3=
-	local b2=
-	local b1=
-
-	while getopts 'm:' opt; do
-		case ${opt} in
-			m) mirror="${OPTARG}";;
-			?)
-				print_usage >&2
-				exit 1
-				;;
-		esac
-	done
-	shift $(($OPTIND - 1))
-	if [ ${#} -ne 0 ]; then
-		print_usage >&2
-		exit 1
-	fi
-
-	install_arch="$(detect_arch)"
-	printf '\nSelect a platorm'
-	printf '\n================\n\n'
-	read host_arch host_plat <<-EOF
-		$(prompt_plat)
-		EOF
-	host_arch="${host_arch}-${install_arch#*-}"
-	check_arch_compat "${install_arch}" "${host_arch}"
-
-	printf '\nSelect a block device'
-	printf '\n=====================\n\n'
-	dev="$(prompt_block_dev)"
-
-	printf '\nMaking partition table and file system'
-	printf '\n======================================\n\n'
-	make_partition_and_fs "${dev}"
-
-	printf '\nInstalling base system'
-	printf '\n======================\n\n'
-
-	mountpoint="$(mount_fs "${dev}")"
-
-	"${0%installers/pc}src/prokit" install \
-		-a "${host_arch}" -p "${host_plat}" \
-		${mirror:+-m} ${mirror} 'dev/trunk' "${mountpoint}"
-
-	printf '\nInstalling boot loader'
-	printf '\n======================\n\n'
-
-	read b4 b3 b2 b1 <<-EOF
-		$(od -An -tx1 -v -j 440 -N 4 "/dev/${dev}")
-		EOF
-	# This ln command won't be needed once lilo 24.1-1 is uploaded.
-	ln "${mountpoint}/boot/vmlinuz" "${mountpoint}/boot/vmlinuz.old"
-	"${0%installers/pc}src/prokit" shell "${mountpoint}" \
-		install-lilo "/dev/${dev}" "PARTUUID=${b1}${b2}${b3}${b4}-01"
-
-	umount_fs "${mountpoint}"
-}
-
-print_usage()
-{
-	printf 'Usage: %s [-m <mirror>]\n' "${0}"
-}
-
-error()
-{
-	local status=${1}
-	local fmt="${2}"
-	shift 2
-
-	printf "Error: ${fmt}\n" "${@}" >&2
-
-	exit ${status}
-}
-
-_select()
-{
-	# Field width of the prompt numbers.
-	select_width=$(expr ${#} : '.*')
-
-	select_i=
-
-	while :; do
-		case "${select_i}" in
-			'')
-				select_i=0
-				for select_word in "${@}"; do
-					select_i=$(expr ${select_i} + 1)
-					printf "%${select_width}d) %s\\n" \
-						${select_i} "${select_word}" \
-						>&2
-				done
-				;;
-			*[!0-9]*)
-				printf 'Please enter a number in range.\n' >&2
-				;;
-			*)
-				if [ ${select_i} -gt 0 ] && \
-						[ ${select_i} -le ${#} ]; then
-					shift $(expr $select_i - 1)
-					select_result="${1}"
-					break
-				fi
-				printf 'Please enter a number in range.\n' >&2
-				;;
-		esac
-
-		# Prompt and read input.
-		printf '%s' "${PS3-#? }" >&2
-		read -r select_i || exit
-	done
-}
-
-detect_arch()
-{
-	local uname_m=
-	local uname_s=
-	local arch=
-
-	uname_m="$( (uname -m) 2>/dev/null)" || uname_m='?'
-	uname_s="$( (uname -s) 2>/dev/null)" || uname_s='?'
-	case "${uname_m}:${uname_s}" in
-		'i686:Linux') arch='i686-linux-glibc';;
-		'x86_64:Linux') arch='amd64-linux-glibc';;
-		'?:?') error 2 'Architecture unknown';;
-		*) error 2 'Architecture unsupported';;
-	esac
-
-	printf '%s\n' "${arch}"
-}
-
-prompt_plat()
-{
-	local desc=
-	local arch=
-	local plat=
-
-	set --
-	while IFS='	' read -r desc arch plat; do
-		[ "x${desc}" = 'x' ] && continue
-		set -- "${@}" "${desc}"
-	done <<-EOF
-		${PLATS}
-		EOF
-
-	printf 'Select a platform:\n' >&2
-	_select "${@}"
-
-	while IFS='	' read -r desc arch plat; do
-		if [ "x${desc}" = "x${select_result}" ]; then
-			printf '%s %s\n' "${arch}" "${plat}"
-			break
-		fi
-	done <<-EOF
-		${PLATS}
-		EOF
-}
-
-check_arch_compat()
-{
-	local install_arch="${1}"
-	local host_arch="${2}"
-	local arches=
-	local install_cpu=
-	local host_cpu=
-
-	if [ "x${install_arch}" = "x${host_arch}" ]; then
-		return 0
-	fi
-
-	arches="$(printf ' %s ' ${ARCHES})"
-	install_cpu="${install_arch%%-*}"
-	host_cpu="${host_arch%%-*}"
-	if [ "x${arches#* ${host_cpu} * ${install_cpu} }" = "x${arches}" ]
-	then
-		error 2 'Cannot install a system of architecture %s on %s %s' \
-			"${host_arch}" 'a system of architecture' \
-			"${install_arch}"
-	fi
-}
-
-pretty_print_size_dec()
-{
-	local size="${1}"
-
-	awk -v size=${size} 'BEGIN {
-		split("B KB MB GB TB", units, " ");
-		i=1;
-		while (size >= 1000) {
-			size /= 1000;
-			++i;
-		};
-		printf("%.2f %s\n", size, units[i]); }'
-}
-
-pretty_print_size_bin()
-{
-	local size="${1}"
-
-	awk -v size=${size} 'BEGIN {
-		split("B KiB MiB GiB TiB", units, " ");
-		i=1;
-		while (size >= 1024) {
-			size /= 1024;
-			++i;
-		};
-		printf("%.2f %s\n", size, units[i]); }'
-}
-
-prompt_block_dev()
-{
-	local dev=
-	local vendor=
-	local model=
-	local name=
-	local size=
-	local size_s=
-	local desc=
-	local devs=
-
-	set --
-	for dev in /sys/block/*; do
-		dev="${dev#/sys/block/}"
-		case "${dev}" in
-			loop*|sr*) continue;;
-		esac
-		if [ -e "/sys/block/${dev}/device/vendor" ]; then
-			vendor="$(cat "/sys/block/${dev}/device/vendor")"
-			model="$(cat "/sys/block/${dev}/device/model")"
-			name="${vendor} ${model}"
-		else
-			name="$(cat "/sys/block/${dev}/device/name")"
-		fi
-		size="$(cat "/sys/block/${dev}/size")"
-		size="$(expr ${size} \* 512)"
-		size_s="$(pretty_print_size_dec "${size}")"
-		size_s="${size_s} ($(pretty_print_size_bin "${size}"))"
-		desc="$(printf '%s (%s) - %s\n' "${name}" "${dev}" "${size_s}")"
-		set -- "${@}" "${desc}"
-		devs="$(printf '%s\n%s\t%s\n' "${devs}" "${desc}" "${dev}")"
-	done
-
-	printf 'Select a block device:\n' >&2
-	_select "${@}"
-
-	while IFS='	' read -r desc dev; do
-		if [ "x${desc}" = "x${select_result}" ]; then
-			printf '%s\n' "${dev}"
-		fi
-	done <<-EOF
-		${devs}
-		EOF
-}
-
-make_partition_and_fs()
-{
-	local dev="${1}"
-
-	dd if=/dev/zero of="/dev/${dev}" bs=512 count=1
-	printf 'n\np\n1\n\n\nt\n83\na\n1\nw\n' | fdisk "/dev/${dev}"
-	mke2fs -t ext4 "/dev/${dev}1"
-}
-
-mount_fs()
-{
-	local dev="${1}"
-	local mountpoint=
-
-	mountpoint="$(mktemp -d)"
-	mount "/dev/${dev}1" "${mountpoint}"
-	printf '%s\n' "${mountpoint}"
-}
-
-umount_fs()
-{
-	local mountpoint="${1}"
-
-	while ! umount "${mountpoint}"; do
-		sleep 1
-	done
-	rmdir "${mountpoint}"
-}
-
-main "${@}"